Choose your currency

Canadian Dollars.

Home About Us


New Products

Contact Us Store Hours Map

Home < Products < Arduino & Accessories


Arduino & Accessories

Arduino UNO

Comes with USB cord


Arduino UNO



Raspberry Pi 3
Model B

More Detail Here

Sale Price
:  $65.00 

(Pick up in store only)

Looking for case for Raspberry
Click here


Arduino UNO Starter Kit


(Pick up in store only)

Package :
1.    1pcs x for Arduino UNO board 19.   1pcs x 8*8 Dot matrix module 
2.    1pcs x USB cable 20.   1pcs x 1-digit display tube
3.    1pack Jump cable 21.   1pcs x Stepping motor
4.    1pcs x Breadboard 22.   1pcs x Stepping motor driver board
5.    5pcs x LED Light 23.   1pcs x 9g servo
6.    1pack Resistor 24.   1pcs x RGB module
7.    1pcs x 10P Female to male dupond line 25.   1pcs x IIC 1602 LCD
8.    1pcs x Potentiometer 26.   1pcs x XY joystick module
9.    2pcs x Buzzer 27.   1pcs x Temperature module
10.  1pcs x 74HC595 28.   1pcs x Water test module
11.  1pcs x Infrared receiver 29.   1pcs x RFID module
12.  1pcs x LM35 temperature sensor 30.   1pcs x RFID Keychain
13.  1pcs x Flame sensor 31.   1pcs x RFID white card
14.  2pcs x Ball switch 32.   1pcs x Sound module
15.  3pcs x Photoresistor 33.   1pcs x Relay module
16.  4pcs x Key button 34.   1pcs x Clock module
17.  1pcs x Remote control 35.   1pcs x 4*4 Key board
18.  1pcs x 4-digit display tube 36.   1pcs x 9V battery snap



3D Printer Kit with 2004 LCD control Panel


(Pick up in store only)


Package :


1 x Ramps  1.4

1 x adapter
1 x 2004 LCD control panel 2 x cable
1 x Mega 2560 r3 5 x A4988 module with heatsink
1 x USB cable  



Sensor Kit


24 pcs Package :
1 x 3W led 1 x IR receiver 1 x 3 color led module
1 x 5V relay module 1 x flame sensor 1 x temperature sensor
1 x 1307 clock module 1 x laser head sensor 1 x tempersture and humidity sensor
1 x key switch module 1 x metal touch module 1 x passive buzzer
1 x obstacle avoidance sensor 1 x mini reed module 1 x linear hall sensor
1 x high sensitivity microphone 1 x magic light cup 1 x A rotary encoder
1 x photoresistor 1 x knock sensor 1 x hunt sensor
1 x infrared emission 1 x tilt switch 1 x active buzzer



L298N Dual H Bridge DC Stepper Motor Driver Board


The drive chip: double H bridge driver L298N chip
The driving part of the terminal power supply scope VMS:+5V ~ +35V
The driving part of the peak current  Io: 2A / bridge
The logical part Vss terminal power supply range: 4.5 to 5.5V
The logical part of the working current range: 0 ~ 36 ma
Control signal input voltage range: 4.5 5.5V low level high level 0V
Maximum power consumption: 20W
Storage temperature: 25 degree ~+ 130 degree
Other functions: control the direction of light, the power indicator, current detection, logical part within plate for electrical interfaces
Driver board size: 55 x 60 x 30mm



L298N Dual H Bridge Stepper Motor Driver Board for Arduino


Double H bridge drive Logical current: 0mA-36mA
Chip: L298N Drive current: 2A (MAX single bridge)
Logical voltage: 5V Storage temperature: -20 to +135
Drive voltage: 5V-35V Max power: 25W
Size: 43x43x27mm  
This module has a built in 5V power supply, when the driving voltage is 7V-35V, this supply is suitable for power supply, DO NOT input voltage to +5V supply interface, however ledding out 5V for external use is available.
When ENA enable IN1 IN2 control OUT1 OUT2
When ENA enable IN3 IN4 control OUT3 OUT4



5A Range current Sensor for Arduino



30Ft Blue Tooth RF Module For Arduino



Gyroscope + Accelerometer Module




Arduino Shield
DC-Motor /Stepper/Servo Shield



DATA Logger



Arduino 5V 4 Channel Relay Shield


Equiped with high -current relay, AC 250V 10A DC30V 10A Standard interface that can be expanded in a variety of development boards
Support 5V Equipped with screw holes for easy installation
Independent wiring in contact area , safe and reliable Applicable to a variety of platforms including   Arduino / AVR / ARM



Air Sensor  Hazardous Gas
Detection Module for Arduino



Sensor for Arduino



Arduino Car Model Wheel

Wheel Size Wheel Width Hole Length Hole Width
 65mm 25mm 5.3mm 3.66mm

$9.99 for 4 pcs


Jumper  Wires

Male to Male

7 Colors , 65 pcs / Bundle


Female to Female

8 Colors , 50 pcs / Bundle



Male to

5 Colors , 50 pcs / Bundle





Raspberry Pi Case For Raspberry Pi 3 Model B


Raspberry coloured enclosure with white removable lid and sides
( GPIO side and HDMI side)
shrink wrapped with 4 rubber feet
Dimensions: 96 x 25 x 70mm


Raspberry Pi Case For Raspberry Pi 3 Model B

Raspberry coloured enclosure with white removable lid and sides
( GPIO side and HDMI side)
shrink wrapped with 4 rubber feet
Dimensions: 96 x 25 x 70mm


ABS Case for
Raspberry Pi

Dimensions: 90 x 25 x 70mm




Opto display Alphanumeric 4 character

Litronix DL2416T

Size: 25 mm x 20 mm

More than a mere display, the DL-2416 is an entire seven-bit ASCII decoder, character generator,
and four-digit alphanumeric display in a single package. The display is made up of four 17-segment dies mounted under a plastic magnifier,
with the control circuitry mounted to the underside of the display and covered with an epoxy coating.
The display has its own memory registers, and will remember character data without processor intervention.


Copyright 2009 A1 Electronic Parts All Rights Reserved