"CLASSIC" UNIVERSAL PUSH-PULL TUBE OUTPUT

Key Features:

• Designed for general purpose or replacement use in push-pull tube output circuits.
• For single ended use, see our 125 SE series - optimized for single ended tube output circuits.
• Frequency response: 150 Hz. - 15 Khz (+/- 1db max. ref. 1 Khz)
• Open style with minimum 5" long primary leads, secondary solder lugs for convenient secondary connections.
• Tables provided with each transformer listing 90 pre-calculated impedance ratios.
• Primary impedances from 1,200 to 25,000 Ohms.
• Secondary impedances from 1.5 to 15 Ohms.

Test Data:

Mechanical Data:

Cat. No. Dimensions (Inches) A B C D G Mtg. Hole 125A 2.06 1.25 1.19 1.75 0.187 125B 2.38 1.38 1.38 2.00 0.187 125C 2.81 1.50 1.69 2.38 0.187 125D 3.25 1.75 2.00 2.81 0.187 125E 3.69 2.00 2.31 3.13 0.187

Schematic & Hook Up Data:

Email us if you have any questions.

Place an order

Back to the main page

A1 Electronic Parts
196 North Queen St.
Toronto, Ontario
M9C 4Y1
Tel: (416) 255-0343
Fax: (416) 255-4617